Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
•
Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
•
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
•
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
C a r e a n d m a i n t e n a n c e
88
•
Do not attempt to open the device other than as
instructed in this guide.
•
Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
•
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
•
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
•
Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
•
Use chargers indoors.
•
Always create a backup of data you want to keep, such
as contacts and calendar notes.
•
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
C a r e a n d m a i n t e n a n c e
89
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorised service facility for
service.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that all electrical and electronic products,
batteries, and accumulators must be taken to separate
collection at the end of their working life. This requirement
applies to the European Union and other locations where
separate collection systems are available. Do not dispose of
these products as unsorted municipal waste.
By returning the products to collection you help prevent
uncontrolled waste disposal and promote the reuse of
material resources. More detailed information is available
from the product retailer, local waste authorities, national
producer responsibility organizations, or your local Nokia
representative. For the product Eco-Declaration or
instructions for returning your obsolete product, go to
country-specific information at www.nokia.com.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
90